Skip to content
Interior Designer and Space Planner
Practice Role

Interior Designer and Space Planner

Develops interior space layouts, finish schedules, lighting plans, and commercial tenant improvement fixture layouts compliant with BC Building Code accessibility and egress standards.

The 5-Point Interior Design & Tenant Improvement Lifecycle

A comprehensive breakdown of occupant load calculations, barrier-free accessibility, and commercial TI drawing deliverables.

Step & LeadKey MilestoneCore Requirement
1. TI Space Planning
Occupant Load Analysis
Calculate occupant loads per BCBC Table 3.1.17.1, exit corridor widths, and sanitary fixture counts.Code-compliant space planning for restaurants, retail, and commercial offices meeting municipal health and safety requirements.
2. Barrier-Free Design
BCBC Section 3.8
Detail universal washrooms, wheelchair turning circles, grab bar geometry, and clear door clearances.Strict adherence to the BC Building Access Handbook and Section 3.8 barrier-free standards.
3. Reflected Ceiling (RCP)
Lighting & Egress
Draft comprehensive ceiling plans coordinating exit signage, emergency illumination, diffusers, and bulkheads.Cross-discipline alignment with mechanical, electrical, and structural engineers in Autodesk Revit.
4. Millwork Detailing
Millwork Joinery
Produce shop-ready millwork elevations, sections, and material schedules with accessible knee clearances.Flame-spread rated commercial materials (BCBC 3.1.13) and durable construction assemblies.
5. AI Note Verification
Specification Review
Use conversational AI tools to double-check finish schedules, drawing notes, and commercial TI checklists.Efficient verification of drawing sheet callouts and specifications before senior review.

Project Roadmap & Scope of Work

Select a phase below to jump to the details

  1. 1
    TI Space Planning
  2. 2
    Section 3.8 Accessibility
  3. 3
    Reflected Ceiling (RCP)
  4. 4
    Millwork & Assemblies
  5. 5
    AI Note Verification

Role Overview & Practice Standards

Overview

Develops interior space layouts, finish schedules, lighting plans, and commercial tenant improvement fixture layouts compliant with BC Building Code accessibility and egress standards.

Practice Talent Profile: "You blend functional aesthetics with municipal compliance. You know that interior design for permits is not just color swatches—it is occupant load calculations (BCBC Table 3.1.17.1), barrier-free washroom accessibility (Section 3.8), travel distances to exits, and millwork detailing. You work seamlessly in Revit to translate commercial and residential spaces into buildable reality."

100%
Occupant Load Compliance
BCBC 3.8
Accessibility Standard
30+ Sets
Tenant Improvements
LOD 300
Revit BIM Integration

Practice Division: Interior Design and Space Planning • Experience Benchmark: 3+ Years BC Interior Practice • Territory: 22 British Columbia Municipalities

Position Filled

Position Filled • Check Back Later

This technical position is currently staffed by our active team. We are not actively recruiting or reviewing direct job applications for this seat at this time.

However, Canadian Blueprint maintains an active candidate shortlist for upcoming residential, multiplex, and commercial expansions across our 22 British Columbia jurisdictions.

Practice Operations • Canadian Blueprint Roster

Skill 01: Commercial Tenant Improvement Space Planning & Occupancy Calculations

Skill 01

Interior design for municipal permits requires rigorous technical compliance. You develop interior layouts for restaurants, retail CRUs, fitness facilities, and professional clinics that comply with BC Building Code Part 3 and Part 9 occupancy rules. You calculate occupant loads under Table 3.1.17.1, determine required exit corridor widths, design code-compliant travel distances, and establish required sanitary fixture counts with precision.

Practice Benchmarks & Expectations:

  • • Calculating occupant loads for assembly, mercantile, business/personal services, and residential occupancies
  • • Determining required exit widths, maximum travel distances, and corridor fire separations
  • • Calculating water closet, lavatory, and universal washroom counts per BCBC Section 3.7 and 3.8
  • • Coordinating layout changes with base-building sprinkler layouts and fire alarm devices

Skill 02: Barrier-Free & Accessibility Compliance (BCBC Section 3.8)

Skill 02

Commercial spaces in British Columbia must meet strict accessibility standards. You have comprehensive mastery of BCBC Section 3.8 (Barrier-Free Design) and the BC Building Access Handbook. You detail universal washroom turning circles (minimum 1,500mm or 1,700mm depending on jurisdiction), grab bar placement, ambulatory toilet stalls, clear door clearances (minimum 850mm), and accessible service counters.

Practice Benchmarks & Expectations:

  • • Full compliance with BCBC Section 3.8 barrier-free washroom and path-of-travel standards
  • • Detailing door operating hardware, threshold bevels, and power door operator clearances
  • • Designing accessible reception counters, work surfaces, and service counters with knee clearance
  • • Eliminating accessibility plan check review comments on commercial tenant improvement submissions

Skill 03: Reflected Ceiling Plans (RCP), Lighting & Electrical Coordination

Skill 03

You translate lighting design and spatial ambiance into fully coordinated permit drawings. You draft detailed Reflected Ceiling Plans (RCP) indicating ceiling heights, bulkheads, emergency exit sign placements, egress illumination levels, and HVAC diffuser locations. You coordinate with mechanical and electrical consulting engineers to ensure ceiling cavities accommodate ductwork and structural beams.

Practice Benchmarks & Expectations:

  • • Developing complete Reflected Ceiling Plans with ceiling height transitions and soffit details
  • • Coordinating emergency lighting, exit signage, and fire alarm strobes with code requirements
  • • Drafting power and communications plans with dedicated equipment circuits and counter outlets
  • • Seamless cross-discipline coordination with mechanical, electrical, and structural consultants

Skill 04: Custom Millwork Detailing & Construction Assemblies

Skill 04

You bring commercial and high-end residential interiors to life with constructible millwork detailing. You produce shop-ready millwork shop drawings in Revit and AutoCAD—detailing reception desks, commercial banquettes, retail display fixtures, custom cabinetry, and feature wall assemblies. You specify durable, code-compliant commercial materials, flame-spread ratings, and moisture-resistant substrates.

Practice Benchmarks & Expectations:

  • • Drafting large-scale millwork elevations, sections, and joinery connection details
  • • Specifying materials compliant with flame-spread ratings and interior finish requirements (BCBC 3.1.13)
  • • Designing ADA/barrier-free accessible counter details with required wheelchair knee clearances
  • • Producing comprehensive interior finish schedules and door hardware specifications

Skill 05: Familiarity with Modern AI Tools for Specification & Note Verification

Skill 05

We look for interior designers who are familiar with modern AI tools as a conversational assistant for reviewing work. We are not looking for an AI automation developer. Rather, you are comfortable chatting with modern conversational AI tools to double-check finish schedules, cross-reference municipal commercial tenant improvement checklists, and verify that drawing notes and specifications are complete and error-free before senior review.

Practice Benchmarks & Expectations:

  • • Familiarity chatting with modern AI assistants to cross-reference municipal tenant improvement submission requirements
  • • Using conversational AI to review interior finish schedules and drawing specifications for omissions
  • • Applying conversational AI tools to double-check notes and accessibility terminology across drawing sheets
  • • Verifying all AI outputs against official BC Building Code Section 3.8 and local municipal bylaw texts

Core Practice Responsibilities

Execution

Every role at Canadian Blueprint requires active ownership, cross-discipline coordination, and adherence to our precision delivery standards.

  • • Design functional, code-compliant interior space layouts for restaurants, retail, medical clinics, and residential renovations.
  • • Calculate occupant loads, plumbing fixture counts, and exit corridor widths per BC Building Code Section 3.8 and Part 9.
  • • Produce detailed reflected ceiling plans (RCP), lighting placements, power layouts, and finish schedules.
  • • Create custom millwork sections, cabinetry elevations, and barrier-free commercial washroom details in Revit.
  • • Coordinate with clients, MEP engineers, and municipal plan checkers during commercial tenant improvement intake.

Software & Digital Production Tools

Tooling

Our production pipeline standardizes on leading BIM, laser scanning, and quality assurance platforms across all 22 municipal markets.

Autodesk Revit Interior Workflows AutoCAD 2024 Enscape / Lumion 3D Visualizers Material and Finish Catalogs
Future Expansion Roster

Interested in Future Openings at Canadian Blueprint?

While the Interior Designer and Space Planner role is currently filled, we welcome introductions from experienced professionals across British Columbia who meet our precision drafting, field measuring, and code standards.

Direct Principal Review • Strict Professional Confidentiality Assured

Canadian Blueprint Logo

Canadian Blueprint Inc.

BC Building Design & Permit Drawings

Published